How to design a solar photovoltaic pumping system

- Jan 25, 2019-

Many people think that designing a solar pump system is a very difficult. In fact, this is not the case.


In fact, as long as you have a little bit of physics related knowledge, you can design a solar pump system. Below, we give some suggestions for design.


First, we know that solar pump system components include: water pumps, solar water pump inverters, solar panels.

Solar panels convert light and heat into electricity. The solar pump inverter converts the transmitted electricity from DC to the AC of the document, which in turn drives the pump. In addition, the inverter can continuously adjust the output voltage, and convert the unstable voltage into a stable voltage through a comprehensive protection device. In addition, the remote control function can monitor the operation of the solar photovoltaic pump system through the mobile terminal and the computer.


So how do you design a suitable solar pump system? We give the following suggestions:


1. Refer to your traffic and head requirements

Choose the right pump for your flow and head needs. Flow refers to the amount of water you need per hour or day. The head is the height of the water pumped away from the well.


2: Choosing the right solar pump inverter

Select a suitable solar water pump inverter based on the various parameters of the selected pump. Pump parameters include: AC, DC, single phase, three phase, boost, pump power, indoor use, outdoor use, underground use and other parameters. Further, select an appropriate inverter.


3: Choosing the right solar panel

According to the power of the pump and the strength of the sun, choose the right solar panel. Usually, we choose the power of the panel, which is 1.5 times the power of the pump. If you want more voltage output, we will increase the board as appropriate.


The above is the steps on how to design a solar pump system, hope is useful for you.

 Solar pumping system