12V24V36V48V60V 80A LCD MPPT Solar Charger

12V24V36V48V60V 80A LCD MPPT Solar Charger

We supply 12V 24V 36V 48V 60V (60A, 80A) MPPT solar charger.
This Series MPPT Controller Has Two Different Current For Your Choice:
MPPT60 (12V/24V/36V/48V/60V 60A), and MPPT80 (12V/24V/36V/48V/60V 80A).
Chat Now

Product Details

Introduction of MPPT Solar Charge Controller

MPPT charge controller that is perfect for an off-grid solar system or marine application. This charge controller is extremely versatile and can manage power from solar panels to a variety of deep cycle batteries—including AGM, gel, flooded lead acid, lithium, calcium etc batteries. Continuing with the theme of versatility, these controllers can be used in 12 volt, 24 volt, 36 volt, 48 volt or 60 volt battery systems. The controller is simple to install and offers powerful customization abilities, so you can set it up easily.

The MPPT80, 12/24/36/48, or 60 VDC, is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from us. The MPPT 80's innovative MPPT algorithm is both continuous and active, increasing your renewable energy yield up to 30%. Thanks to enhanced cooling, the MPPT80 can operate at its full 80 amp maximum current rating in ambient temperatures as high as 104F (40C). 
This series solar charge controllers are remotely programmed and can be monitored via a MATE system display and provides unrivaled complete system integration.

 

Feature of the 12V24V36V48V60V 80A LCD MPPT solar charger

52.png


Application

MPPT Solar charge controller is mainly used for solar power station, solar power system for household, solar street light control system, mobile solar power system, DC wind solar generating systems.

img20930.jpg

Working Diagram

img05524.jpg


Specifications of the 12V24V36V48V60V 80A LCD MPPT solar charger

Model

MPPT80

Nominal Battery Voltage

12, 24, 36, 48, or 60 VDC

(Single model - selectable via field programming at start-up)

Maximum Output Current

80 Amp

@ 104° F (40°C) with adjustable current limit

Maximum Solar Array STC Nameplate

12 VDC systems 1250 Watts /

24 VDC systems 2500 Watts /

48 VDC systems 5000 Watts /

60 VDC Systems 7500 Watts

NEC Recommended Solar Array STC Nameplate

12 VDC systems 1000 Watts /

24 VDC systems 2000 Watts /

48 VDC systems 4000 Watts /

60 VDC Systems 5000 Watts

PV Open Circuit Voltage (VOC)

150 VDC absolute maximum coldest conditions /145 VDC start-up

and operating maximum

Standby Power Consumption

Less than 1 Watt typical

Power Conversion Efficiency

97.5% @ 60 Amps in at 48 VDC System voltage - Typical

Charging Regulation

Five Stages: Bulk, Absorption, Float, Silent and Equalization

Voltage Regulation Set points

10 to 80 VDC user adjustable with password protection

Equalization Charging

Programmable Voltage Set point and Duration - Automatic Termination when completed

Battery Temperature Compensation

Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell

Voltage Step-Down Capability

Can charge a lower voltage battery from a higher voltage PV array

- Max 150 VDC input

Programmable Auxiliary

Control Output

12 VDC output signal which can be programmed for different control

applications (Maximum of 0.2 amps DC)

Status Display

3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total

Remote Display and Controller

Optional Mate or Mate2 with RS232 Serial Communications Port

Network Cabling

Proprietary network system using RJ 45 Modular Connectors with

CAT 5e Cable (8 wires)

Data Logging

Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float,

Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min

Battery Voltage and Absorb for each day along with total Accumulated

Amp Hours, and kW Hours of production

Hydro Turbine Applications

Consult factory for approved Turbines

Positive Ground Applications

Requires two Pole Breakers for switching both positive and Negative

Conductors on both Solar Array and Battery Connections (HUB-4 and

HUB-10 can not be used for use in positive ground applications)

Operating Temperature Range

Minimum -40° to maximum 60° C (Power capacity of the controller is

automatically derated when operated above 40° C)

Environmental Rating

Indoor Type 1

Conduit Knockouts

One 1" (35mm)on the back; One 1" (35mm) on the left side;

Two 1" (35mm) on the bottom

Dimensions - Unit

44 x 14 x 10 cm

Dimensions- Packaged

51 x 24 x 21.5 cm

Weight - Unit

5.6 kg

Weight- Packaged

6.3 kg

Options

Remote Temperature Sensor (RTS), HUB 4,HUB 10, MATE, MATE 2

Menu Languages

English & Spanish

Remark:  MPPPT80 Temperature sensor (RTS) & Remote monitoring control (Mate2) optionally choose by customers.

img12909.jpg

MPPT solar charge controller Remote Temperature Sensor (RTS) 

Automatically check battery temperature, Adjust the battery voltage parameter


img31334.jpg

img00163.jpg


Product details of the 12V24V36V48V60V 80A LCD MPPT solar charger

img26212.jpg

img21223.jpg

img24183.jpg


Production process of the 12V24V36V48V60V 80A LCD MPPT solar charger

img02349.JPG

img07880.jpg            img25333.jpg


Certifications

img29927.jpg


Packing& Delivery

img06993.jpg

img27713.jpg

53.png


Payment

54.png


FAQ

Q: What is the warranty for the solar charge controller?
A: We provide two years warranty.


Q: How about the customer service?

A: All cargoes are tested one by one before leaving factory, and defective ratio is below 0.1%; we will be here to provide good service all the time.


Q: What is the shipping term? 
A: By Sea: cargo can be shipped from Shenzhen or Guangzhou port to your port of destination.

By Air: from Shenzhen/Guangzhou or Hongkong airport to your airport.

By International Express: DHL, TNT, UPS, FedEx, EMS etc.

 


Inquiry