Product Introduction
Solar Charge Controller applies in solar photovoltaic systems, which coordinates the working of solar panels, batteries and loads.
This series charge controller is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from us. The innovative MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).
Included in all of the Charge Controllers are the revolutionary features first developed by us, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated network communications allows this series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.
This MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.
The MPPT Series Controller Has Two Different Current For Your Choice:
MPPT60 (12V/24V/36V/48V/60V 60A),
MPPT80 (12V/24V/36V/48V/60V 80A)
Product Feature
* Increase PV Array Output by up to 30%
* Advanced Continuous Maximum Power Point Tracking
* Full Power Output in Ambient Temperatures up to 104°F (40°C)
* Battery Voltage from 12 VDC to 60 VDC
* PV input Max.150V, Max.7500W system
* Programmable Auxiliary Control Output
* Built-in 128 days of Data Logging
* Fully Network Integrated and Programmable
Display
Text LCD display for operating parameters, fault messages, self test
Operation
Menu-driven operation
Programming by buttons
Application
Working Diagram
Specifications
Model | MPPT60 | MPPT80 | |
Nominal Battery Voltage | 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up) | ||
Maximum Output Current | 60 Amp @ 104° F (40°C) with adjustable current limit | 80 Amp @ 104° F (40°C) with adjustable current limit | |
Maximum Solar Array STC Nameplate | 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / | 12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / | |
48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts | 48 VDC systems 5000 Watts / 60 VDC Systems 7500 Watts | ||
NEC Recommended Solar Array STC Nameplate | 12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / | 12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / | |
48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts | 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts | ||
PV Open Circuit Voltage (VOC) | 150 VDC absolute maximum coldest conditions /145 VDC start-up | ||
and operating maximum | |||
Standby Power Consumption | Less than 1 Watt typical | ||
Power Conversion Efficiency | 98.1% @ 60 Amps in at 48 VDC System voltage - Typical | 97.5% @ 60 Amps in at 48 VDC System voltage - Typical | |
Charging Regulation | Five Stages: Bulk, Absorption, Float, Silent and Equalization | ||
Voltage Regulation Set points | 10 to 80 VDC user adjustable with password protection | ||
Equalization Charging | Programmable Voltage Set point and Duration - Automatic Termination when completed | ||
Battery Temperature Compensation | Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell | ||
Voltage Step-Down Capability | Can charge a lower voltage battery from a higher voltage PV array | ||
- Max 150 VDC input | |||
Programmable Auxiliary Control Output | 12 VDC output signal which can be programmed for different control | ||
applications (Maximum of 0.2 amps DC) | |||
Status Display | 3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total | ||
Remote Display and Controller | Optional Mate or Mate2 with RS232 Serial Communications Port | ||
Network Cabling | Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires) | ||
Data Logging | Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float, Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production | ||
Hydro Turbine Applications | Consult factory for approved Turbines | ||
Positive Ground Applications | Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications) | ||
Operating Temperature Range | Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C) | ||
Environmental Rating | Indoor Type 1 | ||
Conduit Knockouts | One 1" (35mm)on the back; One 1" (35mm) on the left side; | ||
Two 1" (35mm) on the bottom | |||
Dimensions - Unit | 40 x 14 x 10 cm | 44 x 14 x 10 cm | |
Dimensions- Packaged | 46 x 30 x 20 cm | 51 x 24 x 21.5 cm | |
Weight - Unit | 5.3 kg | 5.6 kg | |
Weight- Packaged | 6kg | 6.3 kg | |
Options | Remote Temperature Sensor (RTS), HUB 4,HUB 10, MATE, MATE 2 | ||
Menu Languages | English & Spanish | ||
Remark: MPPT60/MPPPT80 Temperature sensor (RTS) & Remote monitoring control (Mate2) optionally choose by customers.
MPPT solar charge controller Remote Temperature Sensor (RTS)
Automatically check battery temperature, Adjust the battery voltage parameter
Product Details
Production Process
Certifications
Packing& Delivery
Transport of goods by sea, by air freight, by express DHL/UPS/TNT/FedEx etc.
Packaging Details:
6.68kgs/pc
4pcs/CTN
N.W.: 27.0kgs/ctn
G.W.: 28.0kgs/ctn
Box size: 445*230*200mm
Carton size: 480*470*415mm
7.00kgs/pc
4pcs/CTN
N.W.: 28.5kgs/ctn
G.W.: 30.0kgs/ctn
Box size: 520*235*200mm
Carton size: 530*490*425mm
FAQ
Q: What is the current range of this controller?
A: 12V/24V/36V/48V/60V (60A, 80A).
Q: What is the warranty for the solar charge controller?
A: We provide 2 years warranty and offer whole life technical support.
During the warranty period, if the products have any quality problem we will send parts for your repair and replace. If products are damaged by personal then we are not responsible.
Q: What is your payment term?
A: T/T, L/C, Western Union, Paypal or cash etc.
Jensys Power is specialized in manufacturing, supplying premium solar energy related products since 2006, which is well-known as one of the leading manufacturer and supplier of solar charge controller, inverter and pv storage etc products. We are now serving more than 80 countries & regions, meanwhile also received high reputation on the superior product performance and reliability, state of the art technology and built long term good partnerships with valued customers. You are welcome to contact us if you are interested in our products.
