12V 24V LCD PWM Solar Charger

We supply 12V 24V (10A, 15A, 20A, 30A, 45A) LCD PWM solar charger.
Chat Now

Product Details

Product Introduction

Solar Charge Controller applies in solar photovoltaic systems, which coordinates the working of solar panels, batteries and loads. It adds some protection functions, so that the entire system can be in efficient and safe operation. It adopts the most advanced LCD technique and operates fully automatically. The Pulse Width Modulation (PWM) battery charging can greatly increase the lifetime of battery.

This series of charge controllers is the highlight in the range.
The latest charging technologies, combined with a AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it.
A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user.

                                                                                                   

The PR/PRL Series Controller Has Five Different Current For Your Choice:

PR1010 (10A)     PR1515 (15A)     PR2020 (20A)     PR3030 (30A)      PR245 (45A)

PRL1010 (10A)    PRL1515 (15A)    PRL2020 (20A)    PRL3030 (30A)     PRL245 (45A)

img14513.jpg     img01692.jpg

---PRL series is same as PR series, but PRL series controller has one more Backlight function---

 

Product Feature

* Hybrid controller
* State of charge determination with AtonIC (SOC)
* Automatic detection of voltage
* PWM control
* Multistage charging technology
* Load disconnection depending on SOC
* Automatic load reconnection
* Temperature compensation
* Common positive grounding or negative grounding on one terminal
* Integrated self test
* Night light function
* Integrated self test
* Monthly maintenance charge

Electronic Protection functions
* Over charge protection 
* Deep discharge protection
* Reverse polarity protection of load, module and battery
* Automatic electronic fuse
* Short circuit protection at module input
* Over voltage protection at module input
* Open circuit protection without battery
* Reverse current protection at night 
* Over temperature and overload protection
* Battery over voltage shutdown

Display

* Graphical LCD display, (PRL series: with background light, could read data in dark)

* For operating parameters, fault messages, self test operation

* Simple menu-driven operation

* Programming by buttons

* Manual load switch

img10516.JPG

Options

* Prepayment interface

* External temperature sensor

* Alarm contact

 

Application

This series is for off-grid system, such as home system, traffic system, CCTV system, street light, garden lights, parking area and bus station etc.

img01908.jpg


Specifications

Model

PR1010

PRL1010

PR1515

PRL1515

PR2020

PRL2020

PR3030

PRL3030

PR245

PRL245

Characteristics of the operating performance

System voltage

12V(24V)

Own consumption

12mA

DC input side

Open circuit voltage solar module

<47V

Module current

10A

15A

20A

30A

45A

DC output side

Load current

10A

15A

20A

30A

45A

End of charge voltage

liquid 13.9V(27.8V) gel    14.1V(28.2V)

Boost charge voltage

14.4V(28.8V)

Equalisation charge

14.7v(29.4v)

Reconnection voltage(SOC/LVR)

>50%/12.6V(25.2V)

Deep discharge protection(SOC/LVD)

<30%/11.1V(22.2V)

Operating conditions

Ambient temperature

-10℃…+50℃

Fitting and construction

Terminal(fine/single wire)

16m㎡/25m㎡-AWG6/4

Degree of protection

IP 32

Dimension(X x Y x Z)

187X95X44mm

Weight

350g


Working Diagram

img07083.jpg


Product Details

img03827.jpg

img11143.JPG

img08180.jpg

img07134.JPG


Production Process

img13693.JPG

           img13758.jpg     img11793.jpg


Certifications

img30849.jpg


Packing& Delivery

img25321.jpg

img23225.JPG

Transport of goods by sea, by air freight, by express DHL/UPS/TNT/FedEx etc.

Delivery time: 1~2 days for sample, 3~7 days for normal order, 15~25 days for bulk order/OEM order.


Packaging Details:

0.421kg/pcs 
50pcs/ctn 
G.W: 22kgs/ctn 
Box dimension: 190mm*105mm*50mm

Carton dimension: 527mm*397mm*283mm

 

Our Service

◇We are committed 100% strictly inspection before delivery.

◇Sample or trial order are accepted.

◇Fast delivery.

◇We provide global on-line service and fast responding to customers question within 24 hours

 

FAQ

Q: How about the customer service?

A: All cargoes are tested one by one before leaving factory, and defective ratio is below 0.1%; we will be here to provide good service all the time.


Q: What kind of certificate of the solar charge controller you have? 
A: We have CE, RoHS, ISO etc.


Q: What is MOQ of the solar charge controller?
A: The MOQ is 1pc for sample test, MOQ 100pcs for OEM order.

Any question or inquiry please feel free to contact us:

JENSYS POWER TECHNOLOGY CO., LIMITED

Contact person: Nana (Sales Manager)

Mob(WhatsApp): +86-18802068132

Skype id: jensyspower

Email: info@jensysenergy.com

Website: www.jensysenergy.com

 


Inquiry