Solar Charge Controller applies in solar photovoltaic systems, which coordinates the working of solar panels, batteries and loads. The series Solsum E IP68 continues the huge success of one of the most used SHS controllers. With a power range of up to 15A at automatically recognized 12v or 24V it fits to a system sizes of maximum 360W.
The circuit board is completely electronically protected and with the Led user interface it is easy to check the battery of charge at any time. Large terminals guarantee a simple connection of solar panels, battery and load. The Solsum E series controller works on PWM as a low loss series controller.
The Solsum E Series Controller Has Four Different Current For Your Choice:
Solsum 3.3E (3A) Solsum 7.7E (7A) Solsum 10.10E (10A) Solsum 15.15E (15A)
---Solsum E series charge controllers are ---Waterproof IP68 Industrial Level---
* Series controller
* Voltage regulation
* Automatic detection of voltage
* PWM control
* Multistage charging load disconnection
* Automatic load reconnection
* Temperature compensation
* Common positive grounding or negative grounding on one terminal
* Monthly maintenance charge
Electronic Protection functions
* Overcharge Protection
* Deep discharge protection
* Reverse polarity protection of load, module and battery
* Automatic electronic fuse
* Short circuit protection at module input
* Open circuit protection without battery
* Reverse current protection at night
* Over temperature and overload protection
* Battery over-voltage shutdown
* Multifunction LED display
* Multi-coloured LED
* 4 LEDs show operating states for operation, state of charge, fault messages
* Night light function pre-set in the factory or adjustable via our PA RC 100
* Parameterization of function values via our PA RC 100
Characteristics of the operating performance
< 4 mA
DC input side
Open circuit voltage solar module
DC output side
End of charge voltage
Boost charge voltage
> 50% / 12.4 V ... 12.7 V (24.8 V ... 25.4 V)
Deep discharge protection(SOC/LVD)
< 30% / 11.2 V ... 11.6 V (22.4 V ... 23.2 V)
Fitting and construction
4mm² / 6mm² - AWG 12/9
Degree of protection
Dimension(X x Y x Z)
Note: Solsum E series are Waterproof IP68 Industrial Solar Charge Controller.
Incoming Quality Control---Process Quality---Product Inspection---Product Traceability---Equipment Monitoring & Calibration---QSM
Shipment usually by sea, by air freight or by express DHL/UPS/TNT/FedEx etc.
Delivery time: 1-3 days for sample, 15~20 days for bulk order
Box dimension: 97mm*83mm*33mm
Carton dimension: 458mm*362mm*215mm
Packaged in carton
Q: Why choose us?
A: We are specializing in field of solar energy products, e.g., solar charge controller, inverter and pv storage etc. Our company owns modern production lines and high technology quality controlling equipment, professional engineers, highly trained technicians and skilled workers. We always insist on good quality, professional service and leading technology. Besides, customers can purchase premium quality products with favorable price from us.
Q: What about the monthly production of your solar charge controller?
A: Monthly production is above 100,000 sets.
Q: What is the warranty for the solar charge controller?
A: We provide 2 years warranty and offer whole life technical support. During the warranty period, if the products have any quality problem we will send parts for your repair and replace. If products are damaged by personal then we are not responsible.
Jensys Power is specialized in manufacturing, supplying premium solar energy related products since 2006, which is well-known as one of the leading manufacturer and supplier of solar charge controller, inverter and pv storage etc products. We are now serving more than 80 countries & regions, meanwhile also received high reputation on the superior product performance and reliability, state of the art technology and built long term good partnerships with valued customers. You are welcome to contact us if you are interested in our products.