Product Introduction
MPL2410/MPL2415 series MPPT solar charge controller without led driver, adopts the MPPT solar charging technology, supports a load output current of 10A and a 0-10V dimming function, 12V and 24V lead-acid batteries and lithium batteries, and the user can set the operating modes for lead-acid batteries or lithium batteries accordingly.
The MPL Series Controller Has Two Different Current For Your Choice:
MPL2410 (12V/24V 10A) MPL2415 (12V/24V 15A)
Product Feature
1. With MPPT functions, applicable to monocrystalline, polycrystalline and amorphous silicon solar panels serially connected in various numbers significantly improving the solar panels' energy utilization ratio.
2. Adopts the MPPT solar charging technology, with a max. solar panel open-circuit voltage Voc ≤ 60V and a max. solar panel power Pm ≤ 400W.
3. Supports a load output current of 15A and a 0-10V dimming function.
4. Adopts an improved charging algorithm that supports 12V and 24V lead-acid batteries and lithium batteries, and the user can set the operating modes for lead-acid batteries or lithium batteries accordingly.
5. With a load triple-stage brightness adjustment and morning on design, with an operating duration adjustable from 0 to 15 hours and a power settable from 0 to 100%.
6. With a system status log function, able to record a maximum of 7 days of system status, comprehensively and effectively monitoring the system's conditions.
7. Data communication adopts a multi-time two-way handshake protocol and a data compression algorithm, realizing precise and fast data transmission.
8. With an intelligent power mode which can extend the battery life to its top limit by adjusting the dimming signal voltage (0-10V) automatically according to the remaining battery capacity.
9. With an infrared remote control function, operations including setting parameters, reading status and viewing historical data can be conducted remotely.
10. A metal case and an IP68 waterproof level enable the device to operate in various kinds of tough conditions.
11. An overheat protection function enables the device to scale down the load or shut off the load completely when its temperature exceeds a certain point.
12. A range of protection measures such as battery reverse-connection protection, load short-circuit and overload protection, etc., put the system under comprehensive and constant guard.
Application
Specifications
Model | MPL2410 | MPL2415 | |
No-load loss | 26mA/ 12V; 15mA/ 24V | ||
System voltage | 12V/ 24V | ||
Charging current | 10A | 15A | |
Max. solar panel power | 130W/ 12V; 260W/ 24V | 200W/ 12V; 400W/ 24V | |
Solar panel input voltage | < 60V | ||
MPPT tracking efficiency | > 99% | ||
Charging conversion efficiency | 90% to 96% | ||
Dimming output voltage | 0 to 10V | ||
Max. output current | 10A | 15A | |
Over-voltage protection | 17.0V; ×2/24V | ||
Charging limit voltage | 15.5V; × 2/24V | ||
Equalizing charging voltage | (boost charging voltage + 0.2V); ×2/24V (25°C) | ||
Operating temperature | -35°C to +65℃ | ||
Protection degree | IP68 |
Parameter | Value | Adjustable or not | Default | ||
Model | MPL2415 | MPL2415-U/D |
|
| |
No-load loss | 26mA/ 12V; 15mA/ 24V | 40mA/ 12V; 21mA/ 24V |
|
| |
System voltage | 12V/ 24V |
|
| ||
Charging current | 15A |
|
| ||
Max. solar panel power | 200W/ 12V; 400W/ 24V |
|
| ||
Solar panel input voltage | < 60V |
|
| ||
MPPT tracking efficiency | > 99% |
|
| ||
Charging conversion efficiency | 90% to 96% |
|
| ||
Dimming output voltage | 0 to 10V | √ |
| ||
Max. output current | 15A |
|
| ||
Over-voltage protection | Lead-acid batteries | 17.0V; ×2/24V |
|
| |
Charging limit voltage | 15.5V; × 2/24V |
|
| ||
Equalizing charging voltage | (boost charging voltage + 0.2V); ×2/24V (25°C) |
| 14.6V | ||
Equalizing charging time | 1 hour |
|
| ||
Equalizing charging interval | 30 days |
|
| ||
Boost charging voltage | 7.5V to 15.5V; × 2/24V (25°C) | √ | 14.4V | ||
Boost charging time | 4 hours |
|
| ||
Floating charging voltage | 7.5V to 15.5V; × 2/24V (25°C) | √ | 13.8V | ||
Temperature compensation factor | -3.0mV/ °C/ 2V |
|
| ||
Over-voltage protection | Lithium batteries | (overcharge voltage + 2V); ×2/24V (25°C) | √ | 16.6V | |
Whether charging is prohibited below 0 °C | Yes, No | √ | No | ||
Overcharge voltage | 7.5V to 15.5V; × 2/24V (25°C) | √ | 14.6V | ||
Overcharge recovery voltage | 7.5V to 15.5V; × 2/24V (25°C) | √ | 13.6V | ||
Over-discharge voltage | 7.5V to 15.5V; × 2/24V (25°C) | √ | 11.0V | ||
Over-discharge recovery voltage | 7.5V to 15.5V; × 2/24V (25°C) | √ | 12.6V | ||
Light control voltage | 5V to 11V; × 2/24V | √ | 10V | ||
Light control delay | 1 to 50min | √ | 1min | ||
Operating temperature | -35°C to +65℃ |
|
| ||
Protection degree | IP68 |
|
|
Working Diagram
Production Process
Certifications
Packing& Delivery
Transport of goods by sea, by air freight, by express DHL/UPS/TNT/FedEx etc.
Delivery time: 1-3 days for sample, 10~15 days for bulk order
Payment
T/T
EXW, FOB, CFR(C&F), CIF : 30% T/T in advance, balance of payment shall be paid before shipment.
L/C
* Amount more than 50,000 USD, we can accept 30% T/T deposit + 70% balance by Irrevocable L/C at
sight.
Western Union
* Amount less than 5000 USD
Cash
* For customers whose country foreign exchange control
FAQ
Q: Can this controller works with mono or poly solar panel?
A: It can work with both kind of panels if power range within its requirement.
Q: Does this solar street light
controller waterproof?
A: Yes, this is an IP68 waterproof level controller, which enables the device to operate in various tough environments.
Q: Which kind of batteries can be
used to work with this kind of solar controllers?
A: Lead-acid batteries, lithium batteries etc.